YUKEN,REXROTH,VICKERS Hydraulic pump model specifications

YUKEN , REXROTH AND VICKERS ARE the three top brands in the hydraulic field. THEY all offer A wide range of hydraulic pump product lines, INCLUDING plunger pumps, VANE pumps and GEAR pumps.No single “specification sheet” can cover all models, because each brand has many series and variants. The selection needs to be determined according to the requirements of the specific application’s pressure, flow rate, speed, control method, installation method, etc.
The following is an overview of the main hydraulic pump types of these three brands and the naming rules and key specification ranges of some representative series models for your reference：

1. REXROTH (Rexroth-Germany, Bosch Rexroth)
   The most complete product line, advanced technology and wide range of applications.‌
2. Axial piston pump (mainly variable pump): This is Rexroth’s core advantage product.
   Main series:
   A10VSO: Open loop, swash plate design, very classic and widely used.Models such as A10VSO 28 DFR1/31R-PPA12N00.
   Displacement: from a few cc/rev to 250+cc/rev (such as 28, 45, 71, 100, 140, 180, 250)。
   Pressure: The maximum working pressure is usually 280 bar (some models are higher), and the peak pressure is 350 bar.
   Control method: DR (pressure compensation), DRG (pressure + flow composite control), DF… (Load sensitive), LR (constant power), EP (electrical ratio), etc.The DFR1 in the model means that the pressure compensation belt is remotely controlled.
   A11VO: Open circuit, through-shaft drive design (can be connected in series with gear pumps, etc.), used in occasions where auxiliary pumps are required.Models such as A11VO 130 LRDS.
   Displacement: 60-260 cc/Rev.
   Pressure/control: similar to A10VSO, 280 bar working pressure, multiple control methods (LRDS means constant power with DA control).
   A4VSO: Open circuit, high-performance pump with large displacement.Models such as A4VSO 250 DRS/10R-PPB13N00.
   Displacement: 125-1000 cc/Rev.
   Pressure: 350 bar (working)/400 bar (peak).
   Control: various (DRS, HW, HD, EL, etc.).
   A2FO/A2FM: Quantitative/variable oblique shaft pump (curved shaft design), compact structure, commonly used in closed circuits (such as walking machinery).Models such as A2FM 63/61W-VAB010.
   Displacement: Quantitative/variable range from a few cc/rev to 500+cc/Rev.
   Pressure: up to 400/450 bar.
3. Vane pump:
   Main series:
   PV7: Variable vane pump.Models such as PV7-1X/…。
   Displacement: Variable, the maximum displacement range is about 16-100 cc/Rev.
   Pressure: The high pressure series can reach 210 bar.
   PFB: Quantitative vane pump (earlier series, still in use).
4. Gear pump:
   Main series:
   AZPF: External meshing gear pump.Models such as AZPF-11-011L…。
   Displacement: Covers the range of small to medium displacement (such as 1.8-50 cc/rev).
   Pressure: up to 250 bar.
   G series: such as G2.
5. VICKERS (Vickers-Eaton, USA)
   In the field of vane pumps, it has the oldest history and a very high market share, and plunger pumps are also very strong.‌
6. Vane pump: This is Vickers’ iconic product.‌
   Main series:
   V series (PVB/PVC/PVQ/PVF): The most classic and widely used quantitative vane pump series. Models such as PVB5-23, PVQ32-40.
   PVB/PVC: single pump (PVB), double pump (PVC).Wide range of displacement (such as PVB: 5-237 cc/rev).
   PVQ: Modular design, larger flow rate, can be combined into single, double, and triple pumps.Larger displacement (such as 19-140 cc/rev).
   PVF: Higher performance/pressure version.
   Pressure: The standard series working pressure is 175 bar (peak 195 bar), and the high-pressure series (such as with the H suffix) can reach 210 bar (peak 240 bar).
   V/VV/VVQ series: variable vane pump.Models such as V20-1S*.
   Displacement: Variable, the maximum displacement range is about 20-94 cc/Rev.
   Pressure: 175 bar (peak 195 bar).
7. Axial piston pump:
   Main series:
   PVH series: open loop, swash plate design, high performance.Models such as PVH098R01AJ30A25001000.
   Displacement: from 45 cc/rev to 141 cc/rev (098=98cc, 057=57cc, 141=141cc).
   Pressure: Continuous working pressure 280 bar, peak 350 bar.
   Control methods: various (pressure compensation, load sensitivity, constant power, electrical ratio-A in the model often represents pressure compensation).
   PVP series: open circuit, economical plunger pump.The model is such as PVP 41.
   Displacement: 16-64 cc/Rev.
   Pressure: 250 bar (continuous)/280 bar (peak).
   PVB/PVM series: variable piston pumps for closed circuits (walking machinery, etc.).Models such as PVB20.
8. Gear pump:
   Main series: V series gear pumps (such as V2010), Q series.
9. YUKEN (Youyan-Japan)
   It is known for vane pumps and small and medium-displacement plunger pumps, which are cost-effective and widely used in the Asian market.‌
10. Vane pump: It is one of Yuken’s superior products. The design draws on and optimizes Vickers.‌
    Main series:
    PV2R series: The main quantitative vane pump series, modular design, similar to Vickers PVQ. Models such as PV2R1-12-F-RAAA.
    Displacement: Wide coverage (1-12, 1-19, 1-23, 1-31, 1-41, 2-41, 3-65, 4-76, 4-114 Etc., the combination of numbers represents single pump/double pump and displacement level).
    Pressure: standard type 175 bar (peak 195 bar), high pressure type (H) 210 bar (peak 240 bar).
    Features: It can be combined into a single pump, a double pump, and a triple pump.The model suffix indicates the shaft extension, rotation direction, oil port position, etc. (F: flange installation, R: right-handed, AAAA: specific configuration).
    PVR series: variable vane pump.Models such as PVR-1-20.
    Displacement: Variable, the maximum displacement range is about 18-94 cc/Rev.
    Pressure: 175 bar (peak 195 bar).
11. Axial piston pump:
    Main series:
    A series: open loop, swash plate design.Models such as A37-L-R-01-K (A: series, 37: displacement code~37cc, L: control mode-constant power, R: direction of rotation, 01: shaft extension, K: oil port).
    Displacement: from 10 cc/rev to 130 cc/rev (common 10, 19, 26, 37, 45, 56, 75, 100, 130)。
    Pressure: 250 bar (continuous)/280 bar (peak).
    Control method: F (constant voltage/pressure compensation), L (constant power), S (manual variable), E (electrical ratio), etc.
    PVS series: Compact open loop plunger pump.Models such as PVS0-10.
    Displacement: 8-18 cc/Rev.
    Pressure: 250 bar (continuous)/280 bar (peak).
12. Gear pump:
    Main series: GPY series, etc.
    Summary of key parameters of selection
    Type: plunger pump (high pressure and high efficiency, flexible variable control), vane pump (medium pressure, stable, low noise), gear pump (economical, anti-pollution).
    Displacement: The amount of oil discharged per revolution (cc/rev or ml/rev) determines the theoretical flow rate (flow rate = displacement x speed).
    Pressure: maximum working pressure (continuous pressure) and peak pressure.Plunger pumps are usually the highest (280-350 bar+), followed by vane pumps (175-210 bar), and gear pumps are lower (160-250 bar).
    Control methods (variable pump): pressure compensation (DR/PC), load sensitivity (DFR/LS), constant power (LR/CP), electric ratio (EP/E-Control), manual servo (HD), etc.
    Speed range: minimum speed and maximum speed limit.
    Installation method: flange installation (common), tripod installation, through shaft drive capacity (can be equipped with gear pump).
    Oil port size and location: SAE flange, metric thread, etc.
    Shaft extension form: flat key, spline (SAE, DIN, JIS standard), etc.
    Direction of rotation: From the end of the shaft, clockwise (CW) or counterclockwise (CCW).