Technical parameters of T6C017, T6C020, T6C022 series vane pumps
- T6C017 vane pump
Displacement: 17.2 ml/rev (standard displacement for industrial use)
Drive shaft type：
1: SAE B flat key
2: Non-SAE B flat key
3: SAE B spline
4: SAE BB spline
Direction of rotation：
R: Turn right (clockwise)
L: Turn left (counterclockwise)
Oil port direction：
00: Opposite side of the oil inlet
01: The same side of the oil inlet
02: 90° counterclockwise relative to the oil inlet
03: 90° clockwise relative to the oil inlet
Design number: Formulated by the manufacturer to distinguish between different design versions.
Sealing grade：
1=S1 (suitable for mineral oil-based hydraulic oil, commonly used)
4=S4 (suitable for anti-combustion hydraulic fluid)
5=S5 (mineral oil-based hydraulic fluid and anti-combustion hydraulic fluid, the maximum pressure of the suction port can reach 7bar)
Typical application：
Industrial machinery (injection molding machines, die-casting machines, machine tools, etc.)
Mobile equipment (construction machinery, agricultural machinery)
Ship hydraulic system, power generation equipment, metallurgical equipment
- T6C020 vane pump
Displacement: 26.4 ml/rev (standard displacement for industrial use)
Drive shaft type: The same as T6C017, it supports SAE B flat key, non-SAE B flat key, SAE B spline, and SAE BB spline.
Rotation direction: Support right turn (R) and left turn (L).
Oil port direction: Consistent with T6C017, it provides four configurations of 00, 01, 02, and 03.
Design number: Formulated by the manufacturer to distinguish the design version.
Sealing level: The same as T6C017, it supports three sealing standards of S1, S4, and S5.
Typical application：
Industrial machinery (such as machine tools, injection molding machines)
Mobile equipment (such as construction machinery, agricultural machinery)
Ship hydraulic system, power generation equipment - T6C022 vane pump
Displacement: 37.1 ml/rev (standard displacement for industrial use)
Drive shaft type: The same as T6C017 and T6C020, it supports a variety of drive shaft configurations.
Rotation direction: Support right turn (R) and left turn (L).
Oil port direction: Consistent with T6C017 and T6C020, it provides four configurations of 00, 01, 02, and 03.
Design number: Formulated by the manufacturer to distinguish the design version.
Sealing grade: The same as T6C017 and T6C020, and supports three sealing standards of S1, S4, and S5.
Typical application：
Industrial machinery (such as die-casting machines, large machine tools)
Mobile equipment (such as heavy construction machinery, large agricultural machinery)
Ship hydraulic system, power generation equipment, metallurgical equipment
