YUKEN DSG-01,DSG-03 series valves
YUKEN DSG-01, DSG-03 Series Solenoid Valve Specifications
YUKEN DSG-01 and DSG-03 series solenoid operated directional valves are high-performance hydraulic components widely used in industrial hydraulic systems, automation equipment, and engineering machinery. Designed with reliable structure and stable operation, these solenoid valves offer excellent control precision and energy efficiency, making them ideal for various high-demand applications. Below is the detailed English specification sheet optimized for Yoast SEO, covering key parameters, structural features, and technical details to help users and search engines better understand the product.
General Overview of YUKEN DSG-01 & DSG-03 Series
The YUKEN DSG-01 and DSG-03 series are direct-acting solenoid directional valves, available in standard type and shockless type (S-DSG series), as well as low wattage type (E-DSG series) with reduced power consumption. These valves are actuated by a small current signal, enabling direct drive by programmable controllers or sequence controllers, which simplifies the electrical circuit and reduces initial costs. With simple construction, contamination-resistant wet armature solenoids, and stable performance, they are suitable for long-term continuous operation in harsh industrial environments.
Key Specifications of YUKEN DSG-01 Series
| Parameter | Specification | Notes |
|---|---|---|
| Valve Series | DSG-01, S-DSG-01 (shockless), E-DSG-01 (low wattage) | Direct-acting type |
| Maximum Operating Pressure | 16 MPa (standard E-DSG-01); 21 MPa (standard DSG-01) | Depends on spool type and model |
| Maximum Flow Rate | 45 L/min (E-DSG-01); 35 L/min (standard DSG-01) | Ceiling flow without abnormal operation, varies by spool type |
| Maximum T-Line Back Pressure | 16 MPa (E-DSG-01); 1.4-1.85 MPa (standard DSG-01) | Varies by model and spool type |
| Maximum Changeover Frequency | 240 min⁻¹ (E-DSG-01); 100-120 min⁻¹ (standard/shockless DSG-01) | Shockless type has lower frequency |
| Weight | 1.4-2.0 kg | Depends on model and configuration |
| Solenoid Power Consumption | 5 W (E-DSG-01); 29 W (standard DSG-01) | Low wattage type saves operating cost |
| Rated Voltage | DC 24V (standard); DC 12V (optional) | Operating range: DC 21.6-26.4V (24V model) |
| Current | 0.22 A (DC 24V, E-DSG-01); ~10 mA (signal current) | Constant current, no resistor needed |
Key Specifications of YUKEN DSG-03 Series
| Parameter | Specification | Notes |
|---|---|---|
| Valve Series | DSG-03, S-DSG-03 (shockless), E-DSG-03 (low wattage) | Direct-acting type, CE certified models available |
| Maximum Operating Pressure | 16 MPa (E-DSG-03); 31.5 MPa (standard DSG-03) | Suitable for high-pressure industrial scenarios |
| Maximum Flow Rate | 63 L/min (E-DSG-03); 60 L/min (standard DSG-03) | Meets high-load hydraulic system requirements |
| Maximum T-Line Back Pressure | 16 MPa (E-DSG-03); 3.6-5 MPa (standard DSG-03) | Varies by model and spool type |
| Maximum Changeover Frequency | 240 min⁻¹ (E-DSG-03); 120-240 min⁻¹ (standard/shockless DSG-03) | Standard type has higher frequency |
| Weight | 3.6-5 kg | Heavier than DSG-01 series due to larger size |
| Solenoid Power Consumption | 5 W (E-DSG-03); 38 W (standard DSG-03) | Low wattage type reduces coil surface temperature |
| Rated Voltage | DC 24V (standard); DC 12V (optional) | Operating range: DC 21.6-26.4V (24V model) |
| Current | 0.22 A (DC 24V, E-DSG-03); ~10 mA (signal current) | Direct drive by controller available |
Mounting & Accessory Specifications
Both YUKEN DSG-01 and DSG-03 series solenoid valves share compatible sub-plates and mounting bolts, ensuring easy installation and replacement. The sub-plate models and specifications are as follows:
| Valve Series | Sub-Plate Model | Thread Size (RC) | Sub-Plate Weight (kg) |
|---|---|---|---|
| DSG-01 / E-DSG-01 | DSGM-01-31, DSGM-01X-31, DSGM-01Y-31 | 1/8, 1/4, 3/8 | 0.8-3 |
| DSG-03 / E-DSG-03 | DSGM-03-40, DSGM-03X-40, DSGM-03Y-40 | 3/8, 1/2, 3/4 | 3-4.7 |
Note: When sub-plates are not used, the mounting surface must have a good machined finish (1.6 μm). Mounting bolts are not included and need to be ordered separately.
Key Features & Advantages
- Stable Operation: Wet armature solenoid design withstands contamination, ensuring reliable performance in harsh industrial environments.
- Energy Efficiency: Low wattage (5W) E-DSG models significantly reduce operating costs compared to standard models (29W for DSG-01, 38W for DSG-03).
- Easy Integration: Small signal current (≈10mA) enables direct drive by programmable or sequence controllers, simplifying electrical circuitry.
- Versatility: Available in standard, shockless, and low wattage types, with various spool configurations to meet different application needs.
- CE Certification: E-DSG-03 models are CE certified for the European equipment market, expanding application scope.
Application Scope
YUKEN DSG-01 and DSG-03 series solenoid valves are widely used in hydraulic systems, including injection molding machines, die-casting machines, hydraulic presses, construction machinery (excavators, cranes), and automated production lines. They are particularly suitable for applications requiring precise directional control, stable operation, and energy efficiency.
Important Notes
- The maximum flow rate varies by spool type and operating conditions; refer to the standard model list for details.
- For voltage ranges of 5-20V DC, please contact YUKEN for customization.
- Coil surface temperature is minimized in low wattage models, ensuring safe operation in high-temperature environments.
- Regular maintenance is recommended to ensure long service life; check seals every 500 hours and replace hydraulic oil filters every 2000 hours.
