AR16-FR07C-22 YUKEN piston pump
YUKEN piston pump series: A series, AR series, ARL1 series, A3H series, A3HG series, A7H series.
Whats app: +86 13728707767
E-mail: hyd-sales2009@outlook.com
We are a professional manufacturer of hydraulic pumps, offering a complete range of products. Inquiries are welcome! (#^.^#)
YUKEN AR16-FR07C-22 Variable Displacement Piston Pump Specifications
1. Model Interpretation & General Information
|
Item
|
Specification
|
|---|---|
|
Model
|
AR16-FR07C-22
|
|
Type
|
Swash plate type variable displacement axial piston pump
|
|
Series
|
AR Series
|
|
Mounting Type
|
Flange Mounting (F)
|
|
Rotation Direction
|
Clockwise (R) viewed from the shaft end (standard)
|
|
Design Standard
|
22 (For detailed specifications, consult YUKEN official technical documents)
|
|
Approximate Mass
|
9.8 kg (21.6 lbs.)
|
2. Core Technical Parameters
|
Parameter
|
Value
|
|---|---|
|
Geometric Displacement
|
15.8 cm³/rev (0.964 cu.in./rev)
|
|
Minimum Adjustable Displacement
|
6.0 cm³/rev
|
|
Rated Operating Pressure
|
16 MPa (2320 PSI) [200 bar]
|
|
Intermittent Operating Pressure
|
21 MPa (3050 PSI)
|
|
Maximum Operating Pressure
|
21 MPa (3050 PSI)
|
|
Shaft Speed Range
|
600 – 1800 r/min (min – max)
|
|
Volumetric Efficiency
|
Above 90% under efficient working conditions
|
|
Noise Level
|
Below 75 dB (tested at 7 MPa, 1500 rpm)
|
|
Control Type
|
Pressure Compensator (07), Adjustment Range (C): 2.0 – 16 MPa (290 – 2320 PSI) [20 – 160 bar]
|
3. Port Configuration & Piping Notes
|
Port Type
|
Connection Specification
|
|---|---|
|
Suction Port
|
Rc 3/4 (JIS standard); Recommended pipe inner diameter ≥ 8.5 mm; The height of the suction port should be within 1 meter from the oil level in the reservoir
|
|
Discharge Port
|
Rc 3/8 (JIS standard)
|
|
Drain Port
|
M10 thread (JIS standard), 17 mm deep
|
|
Port Position
|
Axial port (standard)
|
4. Hydraulic Fluid Requirements
|
Requirement
|
Specification
|
|---|---|
|
Recommended Fluid
|
Clean petroleum-based anti-wear hydraulic oil, ISO VG32 or VG46
|
|
Fluid Temperature Range
|
10°C to 60°C (50°F to 140°F)
|
|
Contamination Control
|
NAS Grade 10 or cleaner; Install 100μm filter at the suction port and 10μm filter at the return port
|
|
Viscosity Range
|
10 – 400 mm²/s (50 – 1800 SSU); Optimal viscosity: 20 mm²/s (100 SSU) at 50°C (122°F)
|
5. Additional Information & Notes
-
Air Bleeding: It is necessary to bleed air from the pump case and outlet line to avoid vibration caused by air accumulation.
-
Seal Kit: KS-AR16-01-20 (suitable for AR16 series pressure compensator type pumps).
-
Pipe Flange Kits: Available for suction port, including JIS, European and North American standard models.
-
Key Features: Compact aluminum body, high power-to-mass ratio, low noise operation, excellent efficiency and high reliability; Internal parts are interchangeable with YUKEN A series pumps.
-
Application: Suitable for medium and high pressure hydraulic systems such as plastic machinery, die-casting machinery and construction machinery.
yuken Variable Displacement Piston Pumps
| A10-F-R-01-B-K-32 A10-FR07CS-12 A10-LR09DS-60 A100-FR01BS-60 A100-FR07CS-12 A100-LR09DS-60 A145-F-R-05EH-60 A145-FR01CK-32 A145-FR04BK-32 A145-LR01AS-60 A16-F-R-01-C-K-32 A16-FR01CK-32 A16-FR04BK-32 A16-LR01AS-60 A22-F-R-01-B-K-32 A22-FR01BS-60 A22-FR07CS-12 A22-LR09DS-60 A37-F-R-01-C-K-32 A37-FR01CK-32 A37-FR04BK-32 A37-LR01AS-60 A45-FR01BS-60 A45-FR07CS-12 A45-LR09DS-60 |
A56-FR01CK-32 A56-FR04BK-32 A56-LR01AS-60 A70-FR01BS-60 A70-FR07CS-12 A70-LR09DS-60 A90-FR01CK-32 A90-FR04BK-32 A90-LR01AS-60 AR16-FR01C-12 AR16-FR01C-22 AR16-FR01D-12 AR16-FR07C-22 AR16-LR01C-22 AR16-LR09C-22 AR22-FR01C-12 AR22-FR01C-22 AR22-FR01D-12 AR22-FR04C-22 AR22-LR01C-22 AR22-LR04C-22 AR37-FR01C-22 AR37-FR07C-22 AR37-LR01C-22 AR37-LR07C-22 |
ARL1-16-FR01C-22 ARL1-16-FR04C-22 ARL1-16-LR01C-22 ARL1-16-LR04C-22 ARL1-22-FR01C-22 ARL1-22-FR07C-22 ARL1-22-LR01C-22 ARL1-22-LR07C-22 ARL1-8-F-R-01-C-K-10 A7H180-FR01KK-10 A7H180-FR07KK-10 A7H180-FR09-11A4K-10 A7H180-LR01KK-10 A7H180-LR07KK-10 A3H100-FR01-11A4K-10 A3H100-FR07-11A4K-10 A3H100-FR09-11A4K-10 A3H116-FR01KK-10 A3H116-FR07KK-10 A3H145-FR01-11A4K-10 A3H145-FR01KK-10 A3H145-FR04KK-10 A3H145-FR07-11A4K-10 A3H145-FR09-11A4K-10 A3H16-FR01-11A4K-10 |
A3H16-FR01KK-10 A3H16-FR07-11A4K-10 A3H16-FR09-11A4K-10 A3H16-FR14KK-10 A3H16-LR01KK-10 A3H180-FR01-11A4K-10 A3H180-FR01KK-10 A3H180-FR07-11A4K-10 A3H180-FR07KK-10 A3H180-FR09-11A4K-10 A3H37-FR01-11A4K-10 A3H37-FR01KK-10 A3H37-FR07-11A4K-10 A3H37-FR07KK-10 A3H37-FR09-11A4K-10 A3H37-LR01KK-10 A3H56-FR01-11A4K-10 A3H56-FR01KK-10 A3H56-FR04KK-10 A3H56-FR07-11A4K-10 A3H56-FR09-11A4K-10 A3H56-LR01KK-10 A3H71-FR01-11A4K-10 A3H71-FR01KK-10 A3H71-FR07-11A4K-10 |
A3H71-FR07KK-10 A3H71-LR01KK-10 A3H90-FR01KK-10 A3H90-FR04KK-10 A3HG16-FR01KK-10 A3HG37-FR01KK-10 A3HG56-FR01KK-10 A3HG71-FR01KK-E1C-10 A3HG71-FR01KK-E1D-10 A3HG71-FR01KK-J1C-10 A3HG71-FR01KK-J1D-10 A3HG71-FR01KK-U1C-10 A3HG71-FR01KK-U1D-10 A3HG71-FR07KK-E1C-10 A3HG71-FR07KK-E1D-10 A3HG71-FR07KK-J1C-10 A3HG71-FR07KK-J1D-10 A3HG71-FR07KSP-E1C-10 A3HG71-FR07KSP-E1D-10 A3HG71-FR14KK-E1C-10 A3HG71-FR14KK-E1D-10 A3HG71-FR14KK-J1C-10 A3HG71-FR14KK-J1D-10 A3HG71-FR14KSP-E1C-10 A3HG71-FR14KSP-E1D-10 |
Complete products, original authentic products, fast delivery!Welcome to consult.
Process steps：
Customer inquiry: Customers will make inquiries before placing an order to understand product details and communication needs.
Quotation: According to customer needs, provide a formal quotation, including the name, model, quantity, delivery time, payment method, etc. of the goods.
Order confirmation: After the customer confirms the quotation, a formal purchase order will be placed.
Confirm the delivery time: communicate the delivery time with the production department, inform the factory of the order details, and arrange the production plan.
Sign an export contract: After the two parties confirm that it is correct, sign an export contract to establish a trade relationship.
Implement the letter of credit (if applicable): If the payment method of the letter of credit is used, the customer needs to be urged to issue the certificate and review the contents of the letter of credit.
Export stocking: According to the requirements of the contract and the letter of credit, arrange production, purchase raw materials and packaging, and prepare the goods.
Chartering and booking: Contact the freight forwarder to make a booking and arrange the transportation of goods.
Export inspection: Apply to the quality inspection department for export commodity inspection and provide relevant documents.
Apply for a write-off slip: apply for a write-off slip from the foreign exchange management department for subsequent foreign exchange write-off.
Export declaration: Declare exports to the customs and provide documents such as power of attorney for customs declaration, customs declaration form for export goods, commercial invoice, packing list, etc.
