IPH-5A(B)-50-11 Gear pump
IPH SERIES IP PUMP： IPH－2A(B)、IPH－3A(B)、IPH－4A(B)
IPH－5A(B)、IPH－6A(B)
E-mail: hyd-sales2009@outlook.com
Nachi IPH series gear pump:
| IPH-2A-3.5-11 | IPH-2A-5-11 | IPH-2A-6.5-11 | IPH-2A-8-11 | IPH-2B-3.5-11 | IPH-2B-5-11 | IPH-2B-6.5-11 | IPH-2B-8-11 | IPH-3A-10-20 |
| IPH-3A-13-20 | IPH-3A-16-20 | IPH-3B-10-20 | IPH-3B-13-20 | IPH-3B-16-20 | IPH-4B-20-20 | IPH-4B-25-20 | IPH-4B-32-20 | IPH-4A-20-20 |
| IPH-4A-25-20 | IPH-4A-32-20 | IPH-5A-40-21 | IPH-5A-50-21 | IPH-5A-64-21 | IPH-5A-40-11 | IPH-5A-50-11 | IPH-5A-64-11 | IPH-5B-40-21 |
| IPH-5B-50-21 | IPH-5B-64-21 | IPH-5B-40-11 | IPH-5B-50-11 | IPH-5B-64-11 | IPH-6A-80-21 | IPH-6A-100-21 | IPH-6A-125-21 | IPH-6A-80-11 |
| IPH-6A-100-11 | IPH-6A-125-11 | IPH-6B-80-21 | IPH-6B-100-21 | IPH-6B-125-21 | IPH-6B-80-11 | IPH-6B-100-11 | IPH-6B-125-11 |
Nachi hydraulic pump IPH-5A(B)-50-11 specifications are as follows：
Model composition
IPH: Indicates the series of internal meshing gear pumps.
5A(B): 5 indicates the displacement level, and A or B is the design variant, where A is usually a foot-mounted installation and B is a flange-mounted installation.
50: The theoretical displacement, the unit is cm3/rev, that is, the output of 50 ml of oil per revolution.
11: Pressure level, indicating that the maximum working pressure is 11 MPa (about 1600 psi).
Pressure parameters
Rated pressure: 11 MPa (1600 psi), not for long-term overpressure use.
Maximum withstand pressure: 30 MPa (3060 psi), but long-term operation should be within the rated pressure.
Flow parameters
Displacement: 50 cm3/rev, output 50 ml of oil per revolution.
Speed range: The maximum speed can reach 1800 rpm (reference value), and the actual speed needs to be adjusted according to working conditions.
Medium and temperature
Applicable medium: mineral oil or synthetic oil, viscosity range 15~400 cSt (at 40℃).
Temperature range: The environment and oil temperature must be between -20℃~80℃.
Structure and installation
Structure: Internal meshing gear design to reduce axial force and improve efficiency.
Installation method: Type A is foot-mounted installation, and type B is flange-mounted installation.
Drive mode: The coupling or key is connected to the motor or engine to drive directly.
Other features
Inhalation function: The inhalation performance is good, and the inhalation pressure can be used for -0.3kgf/cm3.
Noise and life: The design of internal meshing of corrected involute short teeth is adopted to reduce operating noise and extend service life.
Maintenance: Simple structure, modular design, easy to maintain and replace seals.
.
Complete products, original authentic products, fast delivery!Welcome to consult.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
