T67EC series Double vane pump

T6 series vane pump models: T6C-003 to T6C-031, T6D-014 to T6D-050, T6E-042 to T6E-085, etc.
T7 series vane pump models: T7B, T7BS, T7D, T7E, etc.
T6 series double pump model: T6CC, T6DC, T6EC, etc.
T7 series double pump model: T7DB, T7DC, etc.
T6 series triple pump models: T67DBB, T67DCB, T6DCC, T67DDBS, T6DDCS, T67EDB(S), T6EDC(S), etc.
T7 series triple pump models: T7DBB, T7DCB, T7DCC, T7DDB, T7EDB, etc.

Specifications and key parameters of Denison T67EC series double vane pump：
Core parameters
Pressure level: The maximum working pressure is 275Bar, and the peak pressure is 300Bar (special customization required).
Displacement range: The displacement of a single pump covers 10.8~158.0 cc/rev, and the double pump realizes multi-stage flow output through combination (such as T67EC-050-014 means 50 cc/rev+14 cc/rev).
Compatibility: It is fully interchangeable with Parker T67DCC and T7EDB series, and supports the formation of a triple pump system with T6EC and T6EDC series.

Model analysis
With a typical model T67EC-042-022- B02-1R00-A101 as an example：
042-022: Double pump displacement combination (042 cc/rev + 022 cc/rev).
B02: The specification code of the pump core (the B series corresponds to the medium displacement, the specific displacement needs to be checked in the table).
1R00: Oil port direction configuration (1R indicates flange installation, 00 is the standard direction).
A101: Shaft seal type (A101 is a mineral oil-based hydraulic oil seal).

Application scenario
It is mainly used in high-pressure equipment such as crushers and injection molding machines, and supports independent control of dual actuators.
If you need a detailed parameter table for the specific model, you can provide the complete model for further inquiry.