PVH098 VICKERS Variable Piston Pump Specifications

1. Basic Specifications

• Model: PVH098 VICKERS
• Pump Type: Variable Displacement Inline Piston Pump
• Application: Industrial and Mobile Equipment (earthmoving, construction, machine tools, plastic machinery, etc.)
• Design Feature: Compact size, light weight, high power density, low noise (optional QI type for industrial low-noise design)
• Volume Efficiency: ≥94% – 96%

2. Performance Parameters

• Maximum Geometric Displacement: 98.3 cm³/r (6.0 in³/r)
• Maximum Operating Pressure: 250 bar (3625 psi) for continuous duty; 280 bar (4050 psi) for load sensing systems
• Speed Range:
  • Industrial Type (QI): Maximum 1800 rpm; Output Flow: 170 LPM (45 GPM) @ 1800 rpm
  • Mobile Type (C): Maximum 2100 rpm; Output Flow: 181 LPM (48 GPM) @ 2100 rpm
  • Note: Speeds at 10% displacement need to be reduced to rated speeds at 100% displacement
• Fluid Requirement: Petroleum-based hydraulic oil; Viscosity: 32 cSt at 38°C (150 SUS at 100°F); Inlet Pressure: 0 psi (standard)
• Oil Temperature Range: Suitable for normal industrial and mobile operating temperature (specific range subject to actual application)
• Noise Level: Low-noise design available for noise-sensitive industrial applications

3. Installation & Structural Parameters

• Mounting Flange: SAE “C” 4-bolt type (SAE J744-127-4); Optional ISO 3019/2–125B4HW (not applicable for PVH098)
• Shaft Rotation: Clockwise (R) or Counterclockwise (L) when viewed from the prime mover end
• Shaft Extension Type:
  • Options: Short straight keyed shaft, SAE “C” splined shaft (14 tooth/17 tooth), SAE “CC”/”D” splined or keyed shaft
  • Example: 31.8 (1.25) dia straight keyed shaft with 56.0 (2.20) shaft extension
• Shaft Seal: Single one-way (S) or double two-way (D) fluorocarbon seal; Double seal recommended for series units and wet mounting
• Main Ports:
  • Suction Port: 2.500 SAE 4-bolt split flange port (Code 61) with 1/2-13 UNC-2B threads
  • Pressure Port: 1.000 SAE 4-bolt split flange port (Code 61) with 3/8-16 UNC-2B threads
  • Drain Port: 0.875-14 UNF-2B SAE O-ring port (bottom, top plugged)
• Operating Weight: 108 lbs (49 kg)

4. Control & Other Parameters

• Control Modes (Optional):
  • Pressure Compensator (C/CM/IC): Adjustment range C: 70-250 bar (1015-3625 psi); CM: 40-130 bar (580-1885 psi)
  • Load Sensing (V): 20 bar (290 psi) pressure difference setting
  • Torque Limiter (T): Factory settings in 10 bar (145 psi) increments; Custom settings available
  • Combined Controls: Load Sensing + Pressure Compensator (CV), Load Sensing + Torque Limiter (VT)
• Pressure Compensator Factory Setting: 250 bar (3625 psi) for C type (coded as 25)
• Oil Cleanliness Requirement: ISO 16/14/12 or cleaner for extended component service life
• Design Number: 10 (installation connection dimensions remain unchanged for design numbers 10-19)
• Special Options: Adjustable maximum displacement stop (S, only for non-through drive and non-torque control models); Composite 2-bolt/4-bolt mounting (027); Vertical installation (057)

5. Model Coding (Reference)

• PVH: Series Identifier
• 098: Maximum Geometric Displacement (98.3 cm³/r)
• QI: Industrial Low-Noise Design (blank for mobile use)
• C: Mounting Flange (SAE “C” 4-bolt)
• R: Shaft Rotation (Clockwise)
• 10: Design Number
• C: Pressure Compensator Type
• 25: Pressure Compensator Factory Setting (250 bar)
• 31: Control Design Number