F11-150 series Parker hydraulic motor
F11-005、 F11-006、 F11-010、 F11-012、 F11-014、 F11-019、 F11-150、 F11-250、 F12-30、 F12-40、 F12-60、 F12-80、 F12-90、 F12-110、 F12-125、 F12-152、 F12-162、 F12-182、 F12-250
E-mail: hyd-sales2009@outlook.com
F11 series hydraulic motors: displacement range from 5cc to 250cc, specific specifications include 5cc, 6cc, 10cc, 12cc, 14cc, 19cc, 150cc, 250cc, etc.
F12 series hydraulic motors: displacement range from 30cc to 250cc, specific specifications include 30cc, 40cc, 60cc, 80cc, 90cc, 110cc, 125cc, 152cc, 162cc, 182cc, 250cc, etc.
The specifications of Parker F11-150 series hydraulic motors are as follows：
Core performance parameters
Displacement and speed
The displacement range covers 1.5-7.4 cubic inches/revolution (about 24.6-121 cc/rev), of which the F11-150 model may be close to the upper displacement limit, which is suitable for high-flow demand scenarios.
The maximum speed can reach 14,000 rpm, and it can operate stably to 3000 rpm at a pressure of 350 bar (5000 psi), taking into account high-speed and high-pressure conditions.
Pressure and torque
Maximum intermittent working pressure: 420 bar (6090 psi), continuous working pressure: 350 bar (5075 psi), to meet the needs of heavy-duty industries.
High torque is generated when starting and idling. For example, the F11/F12 series has a significant torque output at low speeds, which is suitable for scenarios such as climbing and digging.
Efficiency and longevity
The volumetric efficiency is >95%, and the total efficiency reaches the industry-leading level, reducing energy loss.
Heavy-duty roller bearings are designed to withstand high axial/radial loads and have a design life of more than 20,000 hours.
Structure and design characteristics
Compact and lightweight
The drive shaft is at an angle of 40° from the axis of the cylinder block, which is compact in structure and 30% lighter in weight than similar products.
The mounting flange and shaft end comply with ISO/SAE standards, support cartridge installation, and save space.
Low noise and high reliability
The design of high-precision pump and valve plate distribution disc reduces noise by 10-15 dB (A) and runs more smoothly.
Laminated piston rings reduce internal leakage, have strong heat and impact resistance, and adapt to oil temperature from -35℃ to 115℃.
Two-way rotation and ease of maintenance
The F11 series M/H type supports two-way rotation, and the L/R type is one-way, which can be flexibly adapted to different systems.
The time-sharing gear drive design simplifies the structure, reduces the number of parts by 20%, and reduces maintenance costs.
Application scenario
Construction machinery: excavator, loader walking system, die-casting machine, injection molding machine mold closing mechanism.
Ship propulsion: Scenarios where the main propulsion or auxiliary power of a small ship requires high torque to start.
Heavy industry: mining equipment, metallurgical machinery, hydraulic systems that require continuous high pressure output.
Typical model example
F11-150-MF-CN-K-000：
The displacement is close to 150 cc/rev (the specific model definition needs to be confirmed), which supports high flow requirements.
Equipped with ISO/BSP ports, compatible with most hydraulic systems, and suitable for spline shafts (DIN 5462 standard).
F11-150-HF-CH-D-000：
Two-way rotating design, optimized heat resistance, suitable for continuous operation in high temperature environments.
The structure is similar to Rexroth A2F6.1, but the internal leakage is smaller and the efficiency is higher..
| F11-005-GB-CV-K-000-0000 F11-005-HB-CV-K-000-000 F11-005-MB-CV-K-000-0000 F11-005-RB-CV-D-000-0000 F11-006-MB-CV-K-000-0000 F11-006-MB-IV-K-000-000 F11-010-HU-CV-K-000-0000 F11-010-MB-CV-K-000-0000 F11-010-RB-CV-K-000-0000 F11-012-QU-CV-K-000-000 F11-012-RB-CV-K-000-0000 F11-014-HB-CV-K-000-000 F11-014-LU-SV-S-000-0000 F11-014-SF-IV-K-000-0000 F11-019-HB-CV-D-000-0000 |
F11-019-MB-CN-K-000-0000 F11-019-MB-CV-K-000-0000 F11-019-RB-CV-K-000-0000 F12-030-LF-IV-K-000-000 F12-030-LF-IV-P-000-000 F12-030-LS-SV-S-000-000 F12-030-LS-SV-T-000-000 F12-030-LS-TV-P-000-000 F12-030-LS-TV-S-000-000 F12-030-LS-TV-T-000-000 F12-030-MF-IV-P-000-000 F12-030-RS-SV-S-000-000 F12-030-RS-TV-S-000-000 F12-030-RS-TV-T-000-000 F12-030-SF-IS-P-000-000 |
F12-040-MF-IV-D-000-0000 F12-040-MF-IV-K-000-000 F12-040-MF-IV-K-000-0000 F12-040-MS-SN-T-000-000 F12-040-MS-SV-S-000-0000 F12-040-MS-SV-T-000-000 F12-040-MS-SV-T-000-0000 F12-040-MS-TV-T-000-000 F12-040-RF-IV-K-000-0000 F12-060-MF-IV-D-000-0000 F12-060-MF-IV-K-000-0000 F12-060-MS-SV-S-000-0000 F12-060-MS-SV-T-000-0000 F12-060-RF-IV-K-000-0000 F12-060-RS-SV-T-000-0000 |
F12-080-LF-IV-K-000-0000 F12-080-MF-IV-D-000-0000 F12-080-MF-IV-K-000-0000 F12-080-MS-SV-T-000-0000 F12-080-RF-IV-K-000-0000 F12-080-RS-SV-T-000-0000 F12-090-MF-IV-D-000-0000 F12-090-MS-SV-S-000-0000 F12-110-MF-IV-K-000-0000 F12-110-MS-SV-S-000-0000 F12-110-RF-IV-K-000-0000 F12-110-RS-SV-T-000-0000 F12-125-RF-IV-K-000-0000 F12-152-MF-FV-G-000-0000 F12-152-MF-SV-S-000-0000 |
Complete products, original authentic products, fast delivery!Welcome to consult.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
