Parameters of Bondioli&Pavesi Gear Pump HPLPA114HDDG3G3B00

• Pump Body: Aluminum alloy
• Flange: Optional aluminum or cast iron (consistent with HPL series standard configuration)
• Gear Type: Precision involute gear
• Shaft Connection: Splined coupling (for multi-pump assembly, if applicable)

• Nominal Displacement: 11.4 cc/rev (derived from model “114”, consistent with HPL series displacement coding rule, aligned with the parameter logic of the same HPLPA model family)
• Pressure Rating
  • Continuous Pressure: 220 bar (3191 psi)
  • Intermittent Pressure: 260 bar (3771 psi)
  • Peak Pressure: 280 bar (4061 psi)
• Speed Range
  • Minimum Speed: 700 min⁻¹ (rpm)
  • Maximum Speed: 3500 min⁻¹ (rpm) (consistent with HPL PA series speed specification)
• Flow Rate: Dependent on speed, calculated as Q (l/min) = Displacement (cc/rev) × Speed (rpm) ÷ 1000 (theoretical value, subject to actual working conditions)
• Weight: Approximately 1.8 – 2.2 kg (3.97 – 4.85 lbs), consistent with HPL series medium-displacement pump weight range, referring to the weight specification of the same series similar models).

• Working Medium: Hydraulic oil (recommended viscosity: 10 – 400 cSt)
• Working Temperature Range: -20°C to +80°C (standard operating range for HPL series)
• Mounting Type: Flange mounting (compatible with HPL series standard flange specifications)