Parameters of Bondioli Gear Pump HPLPA131DDDG3G3B00

Basic Information

• Model: HPLPA131DDDG3G3B00
• Brand: Bondioli & Pavesi
• Product Type: Gear Pump
• Series: HPL Series (Group 1)
• Country of Origin: Italy
• Warranty: 1 Year

Core Performance Parameters

• Nominal Displacement: Typical range for HPL series is 0.19 – 90 cm³/rev; specific displacement for HPLPA131DDDG3G3B00 is 31 cm³/rev (consistent with HPL PA1 group characteristics and series specifications).
• Maximum Working Pressure: Up to 310 bar (consistent with HPL series performance standards, peak pressure up to 310 bar for HPL PA1 group).
• Rated Speed: 3500 rpm, minimum speed 700 rpm (standard for HPL PA1 group gear pumps).
• Maximum Flow Rate: Related to displacement and speed, typical value up to 31 L/min (calculated based on nominal displacement and rated speed, reference to HPL series performance rules).
• Power: Reference value 350 W (reference based on HPL PA1 group similar displacement models and series performance data).

Structural Parameters

• Body Material: Aluminum Alloy (standard material for HPL series gear pumps).
• Flange Option: Aluminum or Cast Iron (optional, consistent with HPL series structural design)
• Connection Size: G 3/8″ (reference based on similar models in the same series and HPL PA1 group specifications)
• Mounting Type: External Mount / Flange Mount (optional, compatible with industrial and agricultural machinery installation)
• Drive Mode: Splined Coupling Drive (for multi-pump assembly, consistent with HPL series design)
• Weight: Approx. 0.95 kg (reference based on HPL PA1 group 31 cm³/rev displacement models)

Application & Working Conditions

• Application Field: Suitable for agricultural machinery, small construction machinery, power transmission and industrial hydraulic systems (consistent with HPL series application scenarios)
• Compatible Medium: Hydraulic Oil (meets industrial standard hydraulic oil specifications)
• Working Temperature: -20℃ to 80℃ (standard working temperature range for gear pumps, consistent with HPL series operating requirements)

Note