Berarma variable vane pump 01-PHP-3-100- FHRM sample
Key Technical Specifications
|
Parameter
|
Value
|
Description
|
|
Model Code
|
01-PHP-3-100-FHRM
|
Berarma high-pressure variable vane pump
|
|
Series
|
PHP
|
High-pressure variable displacement vane pumps
|
|
Size
|
3
|
Physical size classification
|
|
Displacement
|
100 cm³/rev
|
Geometric displacement (ISO 3662)
|
|
Max Flow Rate
|
145 l/min
|
At 1450 rpm
|
|
Max Pressure
|
210 bar
|
For size 3 models
|
|
Pressure Setting Range
|
20-250 bar
|
H-type pressure compensator
|
|
Control Type
|
FHRM
|
Single-stage pressure compensator with manual adjustment
|
|
Rotation Direction
|
Right (clockwise)
|
Viewed from shaft end
|
|
Mounting Flange
|
4-bolt (UNI ISO 3019/2)
|
Gear pump size 2 compatible
|
|
Port Connection
|
GAS BSP (UNI ISO 228/1)
|
Thread standard
|
|
Speed Range
|
800-1800 rpm
|
Optimal operating range
|
|
Viscosity Range
|
22-68 cSt
|
At operating temperature
|
|
Noise Level
|
63-72 dB(A)
|
Typical operating range
|
Model Code Explanation
-
01: Base model identifier
-
PHP: Series designation (high-pressure variable vane pump)
-
3: Size classification
-
100: Displacement in cm³/rev
-
F: Flange type
-
H: Single-stage pressure compensator (20-250 bar range)
-
R: Standard control configuration
-
M: Manual adjustment capability
Features and Benefits
-
High Efficiency: Optimized vane design for reduced energy consumption
-
Low Noise Operation: Advanced hydraulic design minimizes operational noise
-
Quick Response: Hydraulic pressure regulating device for instant flow adjustment
-
Long Service Life: Robust construction with high-quality materials
-
Energy Saving: Automatically adjusts flow to match system demand once set pressure is reached
-
Modular Design: Compatible with various control options (remote control, load sensing, proportional control available)
Installation and Maintenance Notes
-
No radial or axial loads allowed on the drive shaft
-
Proper filtration: Minimum 10 μm filtration required for optimal performance
-
Fluid compatibility: Use mineral-based hydraulic oils with appropriate viscosity
-
Mounting: Follow UNI ISO 3019/2 specifications for proper alignment
-
Pressure flanges: Use check valves or 8 bar check valves in the P line
Main Series of Berarma Variable Vane Pumps：
Their displacement range covers 6 to 200 cc/rev, with continuous operating pressures reaching up to 16 MPa (160 bar). Specific series include:
PLP Series: Low-pressure variable vane pumps equipped with a mechanical pressure regulator. Specific models include, for example, 01 PLP 1 20 F H R M.
PHP Series: High-pressure variable vane pumps equipped with a hydraulic pressure regulator. Specific models include, for example, Berarma Vane Pump 01-PHP-1-20-F-H-R-M.
PHPK Series: Built upon the PHP series, this line incorporates a hydraulic horsepower limiter to optimize power consumption.
PSP/PSPK Series: High-performance variable vane pumps featuring a modular compensator design. Specific models include, for example, Berarma Vane Pump 02-PSP-1-20-F-H-R-M.
PVS Series: Variable vane pumps characterized by a compact structure, light weight, and high operating efficiency. Specific models include, for example, Berarma Vane Pump 02-PVS2-40-F-H-R-M.
PHV Series: A new series of high-pressure variable vane pumps capable of operating pressures up to 250 bar.
PHC Series: High-pressure variable vane pumps featuring a compact structure and stable operation.
ATEX Series: Including models such as PLPX, PHPX, and PHPKX, these pumps are certified under the ATEX Directive and are suitable for use in potentially explosive environments.
