A4VG28/40/56/71/90/125/180/250 Axial Piston Variable Pump
A4VG series is swash-plate type closed-circuit variable displacement axial piston pump, widely used in concrete mixers, pavers, rollers, excavators, harvesters and other construction & agricultural machinery closed hydraulic drive systems. It has compact structure, high power density, stable reversing performance and long service life. Multiple control versions are available: HD, EP, HW, DA, DG, etc., with optional charge pump, flanges, shafts and seal configurations.
- A4VG28: Small displacement
- A4VG40: Small-medium displacement
- A4VG56: Medium displacement
- A4VG71: Medium displacement
- A4VG90: Medium-large displacement
- A4VG125: Large displacement
- A4VG180: Large displacement
- A4VG250: Extra-large displacement
Model & Performance Parameter Table
| Complete Nameplate Model | Nominal Displacement mL/r | Max. Speed r/min | Min. Speed r/min | Reference Shaft Power kW | Weight kg |
|---|---|---|---|---|---|
| A4VG28HD1D1/32R-NZC10F001S | 28 | 3200 | 600 | 24.9 | 26 |
| A4VG28EP1D1/32R-NZC10F001S | 28 | 3200 | 600 | 24.9 | 27 |
| A4VG28HW1D1/32R-NZC10F001S | 28 | 3200 | 600 | 24.9 | 26.5 |
| A4VG28DA1D1/32R-NZC10F001S | 28 | 3200 | 600 | 24.9 | 27.2 |
| A4VG28DG1D1/32R-NZC10F001S | 28 | 3200 | 600 | 24.9 | 27.5 |
| A4VG40HD1D1/32R-NZC10F001S | 40 | 3000 | 600 | 35.6 | 31 |
| A4VG40EP1D1/32R-NZC10F001S | 40 | 3000 | 600 | 35.6 | 32 |
| A4VG40HW1D1/32R-NZC10F001S | 40 | 3000 | 600 | 35.6 | 31.5 |
| A4VG40DA1D1/32R-NZC10F001S | 40 | 3000 | 600 | 35.6 | 32.3 |
| A4VG40DG1D1/32R-NZC10F001S | 40 | 3000 | 600 | 35.6 | 32.6 |
| A4VG56HD1D1/32R-NZC10F001S | 56 | 2700 | 600 | 49.8 | 38 |
| A4VG56EP1D1/32R-NZC10F001S | 56 | 2700 | 600 | 49.8 | 39 |
| A4VG56HW1D1/32R-NZC10F001S | 56 | 2700 | 600 | 49.8 | 38.5 |
| A4VG56DA1D1/32R-NZC10F001S | 56 | 2700 | 600 | 49.8 | 39.4 |
| A4VG56DG1D1/32R-NZC10F001S | 56 | 2700 | 600 | 49.8 | 39.7 |
| A4VG71HD1D1/32R-NZC10F001S | 71 | 2500 | 600 | 63.2 | 47 |
| A4VG71EP1D1/32R-NZC10F001S | 71 | 2500 | 600 | 63.2 | 48 |
| A4VG71HW1D1/32R-NZC10F001S | 71 | 2500 | 600 | 63.2 | 47.6 |
| A4VG90HD1D1/32R-NZC10F001S | 90 | 2300 | 600 | 80.1 | 58 |
| A4VG90EP1D1/32R-NZC10F001S | 90 | 2300 | 600 | 80.1 | 59 |
| A4VG90DA1D1/32R-NZC10F001S | 90 | 2300 | 600 | 80.1 | 59.5 |
| A4VG125HD1D1/32R-NZC10F001S | 125 | 2100 | 600 | 111.3 | 76 |
| A4VG125EP1D1/32R-NZC10F001S | 125 | 2100 | 600 | 111.3 | 77 |
| A4VG125HW1D1/32R-NZC10F001S | 125 | 2100 | 600 | 111.3 | 76.8 |
| A4VG180HD1D1/32R-NZC10F001S | 180 | 1900 | 600 | 160.2 | 98 |
| A4VG180EP1D1/32R-NZC10F001S | 180 | 1900 | 600 | 160.2 | 99 |
| A4VG180DA1D1/32R-NZC10F001S | 180 | 1900 | 600 | 160.2 | 99.6 |
| A4VG250HD1D1/32R-NZC10F001S | 250 | 1700 | 600 | 222.5 | 132 |
| A4VG250EP1D1/32R-NZC10F001S | 250 | 1700 | 600 | 222.5 | 133 |
| A4VG250DG1D1/32R-NZC10F001S | 250 | 1700 | 600 | 222.5 | 134 |
Parameter Notes
- Control code explanation: HD = Hydraulic servo control; EP = Electric proportional control; HW = Manual servo control; DA = Speed-related control; DG = Electric two-point control.
- A4VG is designed for closed-loop hydrostatic transmission system, equipped with built-in charge pump for system replenishment and control oil supply.
- Pressure data is based on anti-wear mineral hydraulic oil. When using water-glycol, synthetic ester and other flame-retardant hydraulic fluids, pressure and speed must be reduced accordingly.
- Theoretical flow excludes volumetric efficiency; actual flow = theoretical flow × volumetric efficiency (90%~94%).
- Reference shaft power formula: Shaft Power = Flow × Pressure ÷ 60 ÷ 0.9, only for preliminary motor selection. Final confirmation depends on actual working cycle.
- Minimum speed is 600 r/min. The suction side must maintain positive pressure. Overspeed and cavitation will seriously shorten service life.
- The suffix of the complete model can be adjusted for different rotation direction, spline shaft, mounting flange and fluorine rubber seal. Please confirm the ordering specification before placing order.