Company News

A10VSO18/28/45/71/100/140 Axial Piston Variable Pump

A10VSO series is swash-plate type variable displacement axial piston pump, widely used in injection molding machines, die-casting machines, construction machinery, hydraulic power stations and other industrial hydraulic systems. It features high efficiency, low noise, stable pressure output and long service life. Various control types are available: DR, DFR, DFR1, DRL, DG, etc., with multiple optional flanges, shafts and seal configurations.

  • A10VSO18: Small displacement
  • A10VSO28: Small-medium displacement
  • A10VSO45: Medium displacement
  • A10VSO71: Medium-large displacement
  • A10VSO100: Large displacement
  • A10VSO140: Extra-large displacement

Model & Performance Parameter Table

Complete Nameplate Model Nominal Displacement mL/r Max. Speed r/min Min. Speed r/min Max. Theoretical Flow L/min Reference Shaft Power kW Weight kg
A10VSO18DR/31R-PPA12N00 18 3000 500 54 12.6 10.5
A10VSO18DFR/31R-PPA12N00 18 3000 500 54 12.6 10.8
A10VSO18DFR1/31R-PPA12N00 18 3000 500 54 12.6 11.0
A10VSO18DRL/31R-PPA12N00 18 3000 500 54 12.6 10.7
A10VSO18DG/31R-PPA12N00 18 3000 500 54 12.6 11.2
A10VSO28DR/31R-PPA12N00 28 2700 500 75.6 19.6 14.0
A10VSO28DFR/31R-PPA12N00 28 2700 500 75.6 19.6 14.3
A10VSO28DFR1/31R-PPA12N00 28 2700 500 75.6 19.6 14.5
A10VSO28DRL/31R-PPA12N00 28 2700 500 75.6 19.6 14.2
A10VSO28DG/31R-PPA12N00 28 2700 500 75.6 19.6 14.7
A10VSO45DR/31R-PPA12N00 45 2600 500 117 31.5 18.5
A10VSO45DFR/31R-PPA12N00 45 2600 500 117 31.5 18.8
A10VSO45DFR1/31R-PPA12N00 45 2600 500 117 31.5 19.0
A10VSO45DRL/31R-PPA12N00 45 2600 500 117 31.5 18.7
A10VSO45DG/31R-PPA12N00 45 2600 500 117 31.5 19.2
A10VSO71DR/31R-PPA12N00 71 2500 500 177.5 49.7 24.5
A10VSO71DFR/31R-PPA12N00 71 2500 500 177.5 49.7 24.8
A10VSO71DFR1/31R-PPA12N00 71 2500 500 177.5 49.7 25.0
A10VSO71DRL/31R-PPA12N00 71 2500 500 177.5 49.7 24.7
A10VSO71DG/31R-PPA12N00 71 2500 500 177.5 49.7 25.2
A10VSO100DR/31R-PPA12N00 100 2300 500 230 70.0 33.0
A10VSO100DFR/31R-PPA12N00 100 2300 500 230 70.0 33.3
A10VSO100DFR1/31R-PPA12N00 100 2300 500 230 70.0 33.5
A10VSO100DRL/31R-PPA12N00 100 2300 500 230 70.0 33.2
A10VSO100DG/31R-PPA12N00 100 2300 500 230 70.0 33.7
A10VSO140DR/31R-PPA12N00 140 2200 500 308 98.0 44.0
A10VSO140DFR/31R-PPA12N00 140 2200 500 308 98.0 44.3
A10VSO140DFR1/31R-PPA12N00 140 2200 500 308 98.0 44.5
A10VSO140DRL/31R-PPA12N00 140 2200 500 308 98.0 44.2
A10VSO140DG/31R-PPA12N00 140 2200 500 308 98.0 44.7

Parameter Notes

  • Control code explanation: DR = Pressure control; DFR = Pressure & flow control; DFR1 = Pressure, flow & power control; DRL = Remote pressure control; DG = Electro-hydraulic proportional control.
  • Rated pressure is based on anti-wear mineral hydraulic oil. For water glycol, synthetic ester and other fire-resistant fluids, working pressure and speed must be derated.
  • Theoretical flow does not consider volumetric efficiency. Actual flow shall be multiplied by efficiency factor 92%~96%.
  • Reference shaft power formula: Shaft Power = Flow × Pressure ÷ 60 ÷ 0.9, only for motor preliminary selection. Final check according to actual working cycle.
  • Minimum speed 500 r/min; suction pressure must be kept positive. Negative suction pressure will require speed reduction.
  • Complete model suffix can be changed for different shaft, flange, seal and rotation direction. Confirm ordering specification before purchase.