Company News

T6 / T7 Fixed Displacement Vane Pump Product Introduction

T6 / T7  Vane Pump

T6 and T7 are Parker Denison (Denison) balanced-type single fixed displacement vane pumps. The T6 series covers the general industrial range in three frame sizes, C, D and E (10.8–268.7 cm³/r); the T7 series is the variable-speed drive version, designed for inverter-driven motors, and offers a wider speed range and higher pressure ratings.

  • T6C / T6D / T6E: general industrial, 240–275 bar class
  • T7B / T7D: for variable-speed (VFD) drives, up to 300 bar

Standard ordering code format: T6C-014-1R00-B1 = series and cam ring (displacement) + shaft type 1 (keyed) + rotation R + porting 00 + design letter B + seal class 1 (mineral oil; 5 = mineral + fire-resistant).

Model and Performance Parameter Table

Complete Nameplate Model Series Ring Code Displacement cm³/r Max. Continuous Pressure bar Max. Intermittent Pressure bar Max. Speed rpm Min. Speed rpm Ref. Shaft Power kW Weight kg
T6C-003-1R00-B1 T6C 003 10.8 240 275 2800 600 13 15.7
T6C-006-1R00-B1 T6C 006 21.3 240 275 2800 600 27 15.7
T6C-008-1R00-B1 T6C 008 26.4 240 275 2800 600 33 15.7
T6C-012-1R00-B1 T6C 012 37.1 240 275 2800 600 46 15.7
T6C-014-1R00-B1 T6C 014 46.0 240 275 2800 600 57 15.7
T6C-020-1R00-B1 T6C 020 63.8 240 275 2800 600 79 15.7
T6C-022-1R00-B1 T6C 022 70.3 240 275 2800 600 88 15.7
T6C-025-1R00-B5 T6C 025 79.3 160 210 2500 600 59 15.7
T6C-031-1R00-B1 T6C 031 100.0 160 210 2500 600 74 15.7
T6D-014-1R00-B1 T6D 014 47.6 210 240 2500 600 46 24.0
T6D-020-1R00-B1 T6D 020 66.0 210 240 2500 600 64 24.0
T6D-024-1R00-B1 T6D 024 79.5 210 240 2500 600 77 24.0
T6D-028-1R00-B1 T6D 028 89.7 210 240 2500 600 87 24.0
T6D-031-1R00-B1 T6D 031 98.3 210 240 2500 600 96 24.0
T6D-035-1R00-B1 T6D 035 111.0 210 240 2500 600 108 24.0
T6D-038-1R00-B1 T6D 038 120.3 210 240 2500 600 117 24.0
T6D-042-1R00-B1 T6D 042 136.0 210 240 2200 600 116 24.0
T6D-050-1R00-B1 T6D 050 158.0 160 210 2200 600 103 24.0
T6E-042-1R00-A1 T6E 042 132.3 210 240 2200 600 113 43.3
T6E-050-1R00-A1 T6E 050 158.5 210 240 2200 600 136 43.3
T6E-052-1R00-A1 T6E 052 164.8 210 240 2200 600 141 43.3
T6E-062-1R00-A1 T6E 062 196.7 210 240 2200 600 168 43.3
T6E-066-1R00-A1 T6E 066 213.3 210 240 2200 600 183 43.3
T6E-072-1R00-A1 T6E 072 227.1 210 240 2200 600 194 43.3
T6E-085-1R00-A1 T6E 085 268.7 210 240 2200 600 230 43.3
T7B-E03-1R00-A1 T7B E03 9.8 275 300 3600 600 18 23.0
T7B-E11-1R00-A1 T7B E11 35.0 275 300 3000 600 54 23.0
T7B-E15-1R00-A1 T7B E15 50.0 240 280 2700 600 60 23.0
T7D-E35-1R00-A1 T7D E35 113.4 260 280 2800 600 153 44.0
T7D-E42-1R00-A1 T7D E42 137.5 230 260 2500 600 146 44.0

Parameter Notes

  • Pressure ratings above are for anti-wear mineral oil (HF-0/HF-2). With non-anti-wear oil, water-glycol, synthetic fluid or water-in-oil emulsion, the T6/T7 rating drops to 175/210 bar or lower; always read the pressure together with its fluid class.
  • Speed and pressure limits are set by the cam ring, not only by the frame: on T6C the large rings (025, 028, 031) are limited to 2500 rpm and 160/210 bar; on T6D the 045/050 rings run to 2200 rpm and the 061 ring to 1800 rpm; T6E tops at 2200 rpm.
  • Theoretical flow at 1500 rpm is the standard 0-bar catalogue delivery of the ring; actual delivery is reduced by volumetric efficiency (typically 90–95%).
  • Shaft power is a reference value only: Shaft power = Flow × Pressure ÷ 60 ÷ 0.9, evaluated at maximum speed and continuous pressure, for preliminary motor sizing.
  • T7B/T7D are the variable-speed versions: minimum speed 600 rpm, maximum 3600 rpm on the smallest rings, with pressure ratings up to 300 bar intermittent; for continuous operation above 300 bar, consult Parker.
  • Seal class: 1 = mineral oil (NBR), 4 = fire-resistant fluids, 5 = both; shaft codes 1/2 = keyed, 3/4 = splined; porting 00 = standard (opposite outlet), 01/02/03 = inline / 90° CCW / 90° CW.
  • Dimensions, torque limits and cartridge kits should be confirmed against the current Parker Denison catalogue before placing an order.