V10 / V20 Fixed Displacement Vane Pump
V10 / V20 Fixed Displacement Vane Pump Product Introduction
V10 and V20 are Vickers-style single fixed displacement vane pumps, widely applied in light-duty hydraulic systems, such as machine tools, material handling equipment, small hydraulic power units and auxiliary circuits. With compact outline, low noise and stable output, they offer abundant displacement options and flexible configurations for port layout, mounting, rotation direction and sealing components.
- V10: Small displacement series
- V20: Medium small displacement series
Model & Performance Parameter Table
| Complete Nameplate Model | Displacement Code | Geometric Displacement mL/r | Max. Pressure MPa | Max. Speed r/min | Min. Speed r/min | Weight kg |
|---|---|---|---|---|---|---|
| V10-1P2P-1A-20R | 1P | 4.8 | 17.5 | 3000 | 600 | 3.2 |
| V10-1P3P-1A-20R | 1P | 6.0 | 17.5 | 3000 | 600 | 3.2 |
| V10-1P4P-1A-20R | 1P | 7.5 | 17.5 | 3000 | 600 | 3.2 |
| V10-1P5P-1A-20R | 1P | 9.2 | 17.5 | 2800 | 600 | 3.2 |
| V10-1P6P-1A-20R | 1P | 10.8 | 17.5 | 2800 | 600 | 3.2 |
| V10-1P7P-1A-20R | 1P | 12.4 | 17.5 | 2800 | 600 | 3.4 |
| V10-1P8P-1A-20R | 1P | 14.0 | 17.5 | 2500 | 600 | 3.4 |
| V10-1P4P-1A-20L | 1P | 7.5 | 17.5 | 3000 | 600 | 3.2 |
| V10-1P6P-1A-20L | 1P | 10.8 | 17.5 | 2800 | 600 | 3.2 |
| F3-V10-1P5P-1A-20R | 1P | 9.2 | 17.5 | 2800 | 600 | 3.2 |
| V20-1P6P-1A-20R | 1P | 10.8 | 17.5 | 2800 | 600 | 5.3 |
| V20-1P7P-1A-20R | 1P | 12.4 | 17.5 | 2800 | 600 | 5.3 |
| V20-1P8P-1A-20R | 1P | 14.0 | 17.5 | 2800 | 600 | 5.3 |
| V20-1P9P-1A-20R | 1P | 15.6 | 17.5 | 2500 | 600 | 5.5 |
| V20-1P10P-1A-20R | 1P | 17.2 | 17.5 | 2500 | 600 | 5.5 |
| V20-1P11P-1A-20R | 1P | 18.9 | 17.5 | 2500 | 600 | 5.5 |
| V20-1P12P-1A-20R | 1P | 20.5 | 17.5 | 2200 | 600 | 5.7 |
| V20-1P13P-1A-20R | 1P | 22.1 | 17.5 | 2200 | 600 | 5.7 |
| V20-1P14P-1A-20R | 1P | 23.7 | 17.5 | 2200 | 600 | 5.7 |
| V20-1P8P-1A-20L | 1P | 14.0 | 17.5 | 2800 | 600 | 5.3 |
| V20-1P10P-1A-20L | 1P | 17.2 | 17.5 | 2500 | 600 | 5.5 |
| V20-1P12P-1A-20L | 1P | 20.5 | 17.5 | 2200 | 600 | 5.7 |
| F3-V20-1P7P-1A-20R | 1P | 12.4 | 17.5 | 2800 | 600 | 5.3 |
| F3-V20-1P9P-1A-20R | 1P | 15.6 | 17.5 | 2500 | 600 | 5.5 |
| F3-V20-1P11P-1A-20R | 1P | 18.9 | 17.5 | 2500 | 600 | 5.5 |
| V10-1P3P-1B-20R | 1P | 6.0 | 17.5 | 3000 | 600 | 3.2 |
| V10-1P7P-1B-20L | 1P | 12.4 | 17.5 | 2800 | 600 | 3.4 |
| V20-1P10P-1B-20R | 1P | 17.2 | 17.5 | 2500 | 600 | 5.5 |
| V20-1P13P-1B-20L | 1P | 22.1 | 17.5 | 2200 | 600 | 5.7 |
| F3-V20-1P14P-1A-20L | 1P | 23.7 | 17.5 | 2200 | 600 | 5.7 |
Parameter Notes
- F3 prefix stands for fluorocarbon seal, suitable for phosphate ester hydraulic fluid; standard 20 suffix is nitrile seal for mineral hydraulic oil.
- Theoretical flow at 1000 r/min is approximately equal to geometric displacement. Actual flow shall be reduced by volumetric efficiency of 90%~95%.
- Shaft power is for reference only. Formula: Shaft power = Outlet Flow × Pressure ÷ 60 ÷ 0.9. It is only used for preliminary motor selection.
- Minimum allowable speed for the whole series is 600 r/min. Derate the maximum speed when suction inlet is under negative pressure.
- The allowable working pressure shall be confirmed according to the actual working condition of the hydraulic system.