Comparison: YUKEN A3HG145 vs A3HG180
YUKEN A3HG145 vs A3HG180
| Item | A3HG145 | A3HG180 |
|---|---|---|
| Geometric displacement | 145.2 cm³/rev | 180.7 cm³/rev |
| Minimum adjustable displacement | 95.0 cm³/rev | 125.0 cm³/rev |
| Rated continuous pressure | 31.5 MPa | 31.5 MPa |
| Intermittent peak pressure | 35 MPa | 35 MPa |
| Speed range | 600 ~ 1800 r/min | 600 ~ 1800 r/min |
| Recommended hydraulic fluid | Anti‑wear mineral oil ISO VG32 / VG46 | Anti‑wear mineral oil ISO VG32 / VG46 |
| Operating viscosity | 20 ~ 400 mm²/s | 20 ~ 400 mm²/s |
| Fluid temperature range | 0 ~ 60 ℃ | 0 ~ 60 ℃ |
| Oil cleanliness requirement | ISO 4406 18/15 or better | ISO 4406 18/15 or better |
| Suction pressure | -16.7 ~ +50 kPa (600–1800 rpm) | -16.7 ~ +50 kPa (600–1800 rpm) |
| Case drain allowable pressure | Normal ≤0.1 MPa; peak ≤0.5 MPa | Normal ≤0.1 MPa; peak ≤0.5 MPa |
| Approx. weight (flange mount FR type) | 68.5 kg | 88 kg |
| Approx. weight (foot mount LR/LL type) | 88 kg | 108 kg |
| Control options | 01 / 07 / 09 /14 | 01 / 07 / 09 /14 |
| Mounting standard | ISO 3019‑1 / ISO 3019‑2 | ISO 3019‑1 / ISO 3019‑2 |
| Through‑drive shaft | Standard | Standard |
| Seals (standard) | FKM for mineral oil | FKM for mineral oil |
Difference & Application Guidance
1. Flow capacity: A3HG180 has larger displacement, delivering higher flow at the same speed, suitable for ultra‑large injection machines, extra‑heavy hydraulic presses, large die‑casting machines and metallurgical main hydraulic circuits.
2. Size & weight: A3HG180 is heavier and larger, needs stronger motor power, bigger suction line and larger oil cooler.
3. A3HG145: Balanced flow and footprint, widely used for large injection, heavy press, thick plate bending machines when A3HG180 flow is excessive.
4. Pressure rating, speed limit, control types, fluid requirements are identical for both models.

yuken Variable Displacement Piston Pumps