VIVOIL High-Pressure Gear Pumps X2P53, X2P55

I. General Basic Parameters (Shared by Both Models)

1. Brand: VIVOIL (Italy VIVOIL)
2. Product Type: High-pressure external gear pump
3. Material: The main body is made of aluminum alloy, and some versions are equipped with cast iron flanges
4. Rotation Direction: Clockwise / Counterclockwise (fixed in one direction, customizable according to requirements)
5. Application Fields: Construction machinery, agricultural machinery, industrial automation equipment, etc.
6. Core Features: Precision gear design, low noise, small vibration, excellent sealing performance, stable operation under high-pressure environment, and small leakage

II. Specific Model Parameters (Explained by Model)

1. X2P53

• Displacement: Approximately 15-25 cm³/rev (referring to the displacement range of 4.2-39.6 cm³/rev of the XV-2P series, derived from the model sequence)
• Maximum Working Pressure: 260-300 bar (aluminum alloy version); 310 bar (cast iron flange version)
• Maximum Rotational Speed: 3500 rpm
• Rated Working Pressure: Approximately 180-220 bar (derived by referring to the parameters of models of the same displacement level in the same series)

2. X2P55

• Displacement: Approximately 25-35 cm³/rev (referring to the displacement range and model sequence of the XV-2P series, slightly higher than X2P53)
• Maximum Working Pressure: 260-300 bar (aluminum alloy version); 310 bar (cast iron flange version)
• Maximum Rotational Speed: 3500 rpm
• Rated Working Pressure: Approximately 200-240 bar (derived by analogy with the parameters of the X2P5902EPOA model in the same series)

Supplementary Notes

1. The above displacement and rated pressure are reference values, which may vary according to different product batches and customized specifications;
2. The displacement of this series of gear pumps ranges from 4.2 to 39.6 cm³/rev, with a maximum pressure of up to 310 bar, which is suitable for the needs of various high-pressure hydraulic systems;
3. Detailed parameters such as installation dimensions, inlet and outlet specifications, and weight shall be subject to the official technical manual.