news

YUKEN Solenoid Operated Directional Valve

Main series: DSG-01 / DSG-03 (standard), S-DSG shockless type, G-DSG adjustable shockless type, DSHG pilot operated solenoid valves

1. General Description

YUKEN DSG series solenoid directional valves are subplate-mounted, wet-solenoid 4-way directional control valves, widely used to switch flow direction of hydraulic actuators (cylinders, hydraulic motors). Two-position / three-position spool configurations are available. Standard type and shockless type are optional. Shockless valves reduce hydraulic shock, noise and pipeline vibration during spool switching. G-series shockless valves support adjustable shifting time. Typical applications: injection molding machines, machine tools, hydraulic presses, material handling, general industrial hydraulic power units.

2. Main Features

  • Wet solenoid construction, high durability, low noise
  • Wide spool function lineup (2B, 3C2, 3C4, 3C6, 3C10 etc.)
  • Standard and shockless versions; G-type with electronic adjustable switching time
  • Multiple solenoid options: AC, DC, R-type (AC input, built-in rectifier)
  • Manual override push button as standard for commissioning
  • Subplate mounting, ISO standard mounting interface; modular valve stacking compatible
  • Detent (no-spring) version available for position holding without continuous energization
  • F- prefix version for phosphate ester fluid with fluororubber seals

3. Model Nomenclature Example

DSG-01-3C2-D24-N1-50

  • DSG: Solenoid operated directional valve
  • 01: Size 01 (1/8” port); 03 = Size 03 (3/8” port)
  • 3C2: Spool function (3-position, spring centred, spool symbol 3C2)
  • D24: DC solenoid, rated voltage 24V
  • N1: DIN plug connector with indicator light; N = DIN plug without light
  • 50: Design number

Prefix code:

  • S-: Shockless type
  • G-: Electronic adjustable shockless type
  • F-: Special fluororubber seal for phosphate ester fluid

Solenoid code:

  • A: AC (A100, A120, A200, A240)
  • D: DC (D12, D24, D48, D110, D220)
  • R: AC-to-DC rectified solenoid (R100, R200)

4. Main Specifications

Model Max Flow L/min Max Operating Pressure MPa Max T-port Back Pressure MPa Max Switching Frequency cycles/min Weight kg
DSG-01 Standard 63 31.5 16 300 2.2
S-DSG-01 Shockless 40 16 16 120 2.2
DSG-03 Standard 120 31.5 16 240 3.6
S-DSG-03 Shockless 80 16 16 120 3.6

Note: Max flow and backpressure limit vary with different spool types (e.g. 3C6, 3C10)

Electrical Ratings

  • DC solenoid: ~29W nominal power
  • R-type rectified solenoid: ~29W
  • Voltage tolerance: ±5% of rated voltage
  • Coil insulation class: Class B

5. Hydraulic Fluid Requirements

  • Recommended fluid: Anti-wear hydraulic oil ISO VG32 / VG46
  • Viscosity range: 20 ~ 200 mm²/s
  • Operating oil temperature: −15 ~ +60°C
  • Fluid cleanliness: NAS 1638 Grade 11 or better; 20 μm return filter recommended
  • Special fluids:
    • Water-glycol: confirm seal compatibility
    • Phosphate ester: order F- version with fluororubber seals

6. Installation & Piping Instructions

  1. Mounting: No orientation restriction for spring return models. Detent (no-spring) models must be installed with spool axis horizontal.
  2. Subplate: Use designated YUKEN subplate (DSGM-01 / DSGM-03). Clean mounting surface before assembly.
  3. Tank line (T port): Do not add throttle or check valve on T line. Drain pipe must be submerged below oil level, avoid pressure surge.
  4. Pilot supply: Internal pilot is standard; external pilot (X port) for low supply pressure systems.
  5. Manual override: Push button for manual operation during commissioning; do not use as continuous control.
  6. Wiring: Keep wiring away from high-power cables; ensure connector sealing to prevent water ingress.

7. Spool Function Brief (Common)

  • 2B2: 2-position, spring offset
  • 3C2: 3-position spring centred, P closed, A/B/T connected at centre
  • 3C4: 3-position spring centred, P/A/B/T all closed at centre
  • 3C6: 3-position spring centred, P/T connected, A/B closed at centre
  • 3C10: 3-position spring centred, P/A connected, B/T connected at centre

8. Control & Optional Versions

  • Standard DSG: General purpose, fast switching
  • S-DSG Shockless: Fixed slow switching, reduce hydraulic shock
  • G-DSG Shockless: Adjustable switching time via built-in electronic circuit
  • DSHG: Pilot operated solenoid valve for large flow
  • E-DSG: Low power 5W solenoid for energy-saving systems
  • With lockable manual push button (N option)

9. Caution Notes

  • Do not apply pressure beyond rated working pressure.
  • Continuous energization of coils is allowed, but avoid overvoltage.
  • If chattering, slow switching or no action occurs: check supply voltage, oil contamination, backpressure on T port or clogged filter.
  • Do not disassemble solenoid and spool assembly without professional maintenance.
  • Shockless models have lower max flow and pressure limit than standard DSG.